How To Install Ps3 Blu Ray Drive
Repair guide : Blu-Ray daughterboard (PCB) Playstation 3 Fat
Level : Easy Time : 30 min Author : Alexandre
240 people have done this repair successfully ! Why non y'all?
This guide will help you supercede the Blu-Ray Disc daughterboard of your PlayStation iii.
Some advice earlier you start
Recommended repair kit
Required spare parts
Step ane
Earlier proceeding to supersede the Blu-Ray daughterboard on your PS3 Fatty, we advise you lot to turn information technology off and unplug it from whatever source of electricity.
Lift off the small silicone encompass to release the screw that's holding the smart plate in place.
Step 2
Use a torx screwdriver to unscrew the screw that was underneath the silicone cover simply removed.
This spiral, circled in ruby-red in the photo, secures the smart plate on your PS3.
Step 3
Delicately push the smart plate cover downward towards the lesser of the panel.
Then grasp information technology in order to remove it from your Playstation 3.
Step 4
At present elevator the smart plate and remove it completely.
Pace 5
Using a cross headed screwdriver, at present unscrew the 8 screws circled in red in the photo.
Step 6
Now elevator the peak cover in society to remove it from the PlayStation 3.
Don't try to fully remove the encompass for now. Information technology's still continued by the retentiveness card reader cable.
Step 7
Using a nylon spudger, delicately lever upward the latch that secures the cable for the retention card reader in its connector.
Footstep 8
Now remove the cable from its connector. To do this, delicately pull the cable. No resistance should exist felt.
You lot tin now completely remove the top cover from your PS3 Fat.
Step nine
Disconnect the power supply cable for the Blu-Ray reader.
To do this, delicately pull the cable upward to remove it from its connector .
Step 10
Now delicately lift the Blu-Ray reader.
Don't try to completely remove the Blu-Ray reader from your PS3 every bit information technology'south still connected to the PlayStation 3 by a cable.
Step xi
As indicated in the photos, use the nylon spudger to delicately lift the latch.
This connects the Blu-Ray reader to the logic board.
Footstep 12
Now delicately pull on the cablevision in order to remove it from its connector.
No resistance should be felt.
Step 13
Using the flat border of the nylon spudger, lift the latch to unlock the Blu-Ray reader cable from its connector.
Stride 14
Delicately pull on the connector cable to remove it from its placement.
The cable should come upward without any resistance.
The Blu-Ray reader of your PS3 Fat is at present removed.
Step xv
Every bit indicated in the photograph, grasp the Blu-Ray lens cablevision, and and then pull upwards delicately.
This cable should lift out of its connector without resistance.
Footstep xvi
Using the iSesamo spudger (or nylon spudger) delicately flip the latch in order to release it.
This hold the data cable for the Blu-Ray reader in its connector.
Footstep 17
Every bit indicated in the photo, grasp the cable and delicately lift it. The cable should release from the connector without resistance.
Pace 18
Using the iSesamo spudger (or the nylon), delicately lever up the latch to lift it and release it.
This secures the cable for the motor of the Blu-Ray reader in its connecter on the daughterboard.
Step 19
As indicated in the photo, grasp the cable and delicately lift it.
The cable should release from the connector without resistance.
Step xx
Using the iSesamo spudger (or the nylon), delicately lever up the latch to lift it and release it.
This secures the cable for the infrared sensor of the Blu-Ray reader in its connector on the daughterboard.
Step 21
Every bit indicated in the photo, grasp the cablevision and delicately lift information technology.
The cable should release from the connector without resistance.
Step 22
Unscrew the 5 cross headed screws circled in red in the photograph.
These secure the Blu-Ray readers daughterboard to the frame of the disc reader of your PS3.
Step 23
Using your fingers, delicately pull the metallic edge on the front of the Blu-Ray reader downward slightly.
This is to make the removal of the daughterboard of the Blu-ray reader easier.
Step 24
Lift the lath upward and flip it over to the right as indicated in the pictures.
Don't try to remove it completely now. Information technology is still connected by some cables.
Step 25
With either the iSesamo spudger or the nylon spudger, delicately disconnect the plug for the infrared sensor cable.
Step 26
Delicately pull on the Blu-Ray reader power supply cable in order to remove it from the plug on the daughterboard.
Step 27
The daughterboard of the Blu-Ray reader on your Playstation 3 is at present removed.
You tin can at present replace it with a new daughterboard if necessary.
Recommended repair kit
Required spare parts
Source: https://www.sosav.com/guides/game-consoles/sony/sony-home/playstation-3/blu-ray-daughterboard/
Posted by: munozmame1952.blogspot.com
0 Response to "How To Install Ps3 Blu Ray Drive"
Post a Comment